Disassembly Steps Of Stainless Steel Door Lock

1.Insert a screwdriver or small wire into the hole: First, insert a screwdriver or small wire into the hole of the door lock to start the disassembly process. ‌
2.Disassemble door handle: Remove the door handle, which can usually be done by inserting a tool and rotating it counterclockwise.
3.Remove the outer decorative ring: Rotate counterclockwise a few times to remove the outer decorative ring and expose the fixing screws inside.
4.Remove the fixing screws: Use a screwdriver to loosen the fixing screws, and then gently pull out the door lock to remove the lock cylinder.