Doors door factories often used in a wide variety of door locks. Material characteristics, use scenarios usage scenarios requirements need to be taken into account when selecting different types of locks (truthful wood doors doors, steel-wood doors, aluminum alloy doors). Here's a breakdown and matching advice:
1. Common types and characteristics of locks.
Type of mechanical lock
Pin door lock: Switches are achieved by matching pin and key ring. It has a single/dual/triple/multiplesecurity structure. As the number of pins increases, so does the security level, suitable for entry doors with high security requirements.
Plug door lock: Lock body embedded in the door, divided into steel door plug lock (for metal door) and wood door plug lock (for solid wood door). Its anti-theft performance is better than that of ordinary locks, and it is often used in entry doors.
Ball door lock: handle is spherical. Materials include copper and stainless steel. It's cheap, but it's not safe. It is mainly used for indoor doors.
3. Three-bar handle lock: The door handle is shaped like a doorknob and is made of iron and zinc alloy. Its level of safety is average. Suitable for indoor doors or scenes with low security requirements.
Lockdown: Available in copper/iron/ code type and in sizes 15-75mm. It works with temporary locking or low security requirements.
Smart Locks
Electronic Password Locks: Enter the password to open. Security depends on the complexity of the password. Suitable for situations that require flexible management.
Fingerprint Locks/Magnetic Card Locks/IC Card Locks: Very convenient with biometric or card technology. However, it is important to pay attention to contingency plans in the event of a power outages or electronic malfunction,such as being equipped with mechanical keys.
Fully Automatic Smart Locks: supports a variety of multiple unlocking methods, such as fingerprint unlocking, password unlocking, card unlocking, key unlocking. Equipped with anti-selection, anti-temptation alarm function, suitable for high-end doors.
Special Locks
Glass Door Locks: High strength structural steel or zinc alloy casting for glass doors commonly found in shops or office buildings.
Push lock: Includes hook locks (suitable for wood/aluminum alloy push doors), bolt locks (for added security) and crescent lock (lightweight). They apply to scenes such as balconies and kitchens.
2. Compatibility Recommendations for Doors of Different Materials
Solid wood doors
Suitable Lock Types: Insert-core door locks, smart locks, three-bar lock.
Key Parameters: Doors should be ≥ 40mm thick (smart locks typically require 35,120mm) and hollow wooden doors should be reinforced with door frames.
Recommendation Reasons: Solid wood doors are great value, so be sure to opt for durable locks such as stainless steel locks and zinc alloy lock bodies. Smart locks can improve convenience and safety.
Steel wood doors
Suitable Lock Types: pin door locks, core door locks, smart lock (make sure the lock is compatible with the door).
Key Parameters: It's best to choose a lock with two locks, each controlling two pins to improve burglary protection; seals and hinges need to work in coordination with the lock to avoid door deformation.
Recommendation Reasons: Steel andwood doors are sturdy, so they need to be paired with high-security locks. Smart locks offer both convenience and security.
Aluminum doors
Suitable Lock Types: Aluminum alloy-specific locks, hook locks, crescent lock.
Key Parameters: lock body needs to be made of rust-resistant material (such as 304 stainless steel), suitable for the lightweight characteristics of aluminum alloy doors, when installing push and pull doors, attention should be paid to the length of the hook tongue and the gap between the door frame and the door frame.
Recommendation Reasons: Aluminum alloy doors are often used in balconies or commercial spaces, so choose doors that are corrosion resistant and easy to install. Smart locks can improve administrative efficiency.